The Kel Tec Sub 2000 Review

kel tec sub 2000

The Kel-Tec Sub-2000 is a surprisingly good firearm, particularly for its price tag of $399. Sure, it has some issues, but the gun does the job, and at this price, it is hard to complain. Compared to similar firearms, which can cost tens of thousands of dollars, the Sub-2000 is a bargain. The gun looks ugly, but it will do the job, so that’s not a bad thing.


If you’re looking to get rid of the recoil from your Kel Tec Sub 2000, you can consider upgrading your buffer with the Missouri Tactical Recoil Buffer. This upgrade is less than $10 on Amazon and your local gun store. It works by absorbing felt recoil and reducing wear and tear on the hard plastic buffer. It also reduces noise. You can purchase it for under $20.

While the KelTec Sub 2000 is relatively easy to use and disassemble, there are a few things that you should know. First of all, you should make sure the gun is unloaded and clear of ammunition. You should then get into the firing position. The bolt should be in a forward position and the stock pin should be seated correctly. Next, you should press the buffer assembly into place. The buffer assembly is located on the upper handguard.

The Kel-Tec Sub 2000 is a pistol with a high-quality trigger. It features a red ring when the trigger is on “fire” and a detent for crisp actuation. A glass-filled polymer trigger helps control recoil, but the trigger is a bit flexy. Mcarbo trigger parts can be replaced if necessary. The trigger strikes a false wall after three to four mm of free travel. After this, the trigger hits the second wall.


One of the advantages of a PCC is that it can be stored in any vehicle. The Keltec Sub 2000 fits perfectly in a backpack, computer case, or briefcase. A common misconception about PCCs is the fact that they are relatively light and don’t cause as much recoil as a full-sized AR rifle. This is because the bolt mass is moving back and forth to operate the firearm safely.

The KelTec Sub2000 has a polymer stock with three positions. The stock is also designed with a rubber over mold to prevent the gun from slipping. The magazine release is on the side where J.M. Browning intended it and is non-reversible. It also accepts different magazines, including Glock magazines. The Sub 2000 is compatible with most Glock magazines. There are three-round and five-round magazines, and the KelTec Sub 2000 accepts both.

The Kel-Tec Sub 2000 has an MSRP of $409, making it a relatively cheap alternative to a high-end AR-15. But finding one of these rifles is a little tough because prices are usually closer to $500 the.40 S&W version, and less than $100 for the 9mm model. However, the price of a KelTec Sub 2000 can still be found online, as the company has several other options.


When it comes to the materials used to build the KelTec Sub2000, some may be disappointed with the results. While the gun has steel components and a glass-filled polymer forearm, these materials are used to keep the weight down and strength high in the right places. Some people fault KelTec for the glass-filled polymer in its design, but it does not aim to compete with mainstream manufacturers. This is why KelTec uses such materials.

This polymer-made gun has three positions and a locking latch on the rear of the stock. The charging handle rides in a cutout on the buffer tube and can be locked in place to lock the bolt to the rear. The stock has sufficient surface area for feeding different types of magazines, including Glock magazines in 9mm and 40 S&W. It also has a Picatinny rail and sling loop attachments.

Another important feature of the Keltec Sub 2000 is its lightweight and compact design. The SUB 2000 rifle has a 16″ barrel chambered in a pistol caliber cartridge. It also has a railed fore-end. The gun is designed to be shoulder-fired, and it can be used for hunting and self-defense. It’s a great gun for home defense and for the gym.


The Kel Tec Sub 2000’s ergonomics are truly horrific. It is difficult to hold the gun comfortably unless you rest your cheek on the buffer tube, and the locking latch can smack you in the jaw. Moreover, there is an odd design for the charging handle and a bulky spring that makes it even more uncomfortable to use. But the good news is that this gun’s ergonomics are easily fixed.

First of all, this is the only folding pistol carbine in the U.S. market today. However, it has a lot of flaws. It is big and has bad recoil, but it can be stored in a backpack. That makes it a great option for outdoorsmen. You can even carry it in your pack if you need to, thanks to its compact size and low weight.

Secondly, the Kel Tec Sub 2000 is a pistol-caliber carbine. This means it is capable of handling pistol-caliber magazines such as S&W third generation and Beretta 92. Additionally, it can be folded in half and carried in a backpack or vehicle with ease. Those two features are what make this rifle so versatile. When used as a carbine, it can be useful for hunting, law enforcement, and more.


If you are a firearm enthusiast, you have probably heard of the Keltec Sub 2000, a high-end submachine gun that comes with excellent optics. The Sub 2000 is an excellent weapon to begin learning about this platform, and you can learn much about it by reading about Keltec’s history, design, and advantages. For a close look, here are a few of its features:

This firearm is made by Midwest Industries, an American company that specializes in manufacturing high-quality rifle parts and accessories. The Sub-2000 comes with an Aimpoint red-dot mount that doesn’t interfere with the pivot design of the gun. This pivoting design means that the gun can be folded compactly without interference from the optic. You’ll be able to easily change your sights to adjust the field of view.

This mount is made by Midwest Industries, a manufacturer of high-quality rifle accessories. It attaches to the M-Lok rail on the handguard and swivels to expose the iron sights. This mount folds neatly under the Sub 2000 when not in use. It looks to be made of high-quality materials and should be durable for years. While the mount is not made for the Sub 2000 itself, it does come with a set of swivel mounts to make it easy to use.

Folding design

The Keltec SUB 2000 is a pistol-caliber carbine that folds in half for easy storage. The gun is also lightweight and compact and is able to fit into a backpack. However, the gun’s main downsides make it a poor choice for those who need to carry a gun with them when on the go. Here are some reasons to consider this rifle:

– The Kel-Tec SUB 2000’s design is very unique. It is easy to fold the gun in half, and the trigger guard can be removed from the rifle. To fold it, simply pull the trigger guard down, swing the barrel assembly back over the top of the rifle, and a latch on the buttstock secures the front sight housing. In this folded position, the gun is unloaded and cannot be fired.

– Easy storage. The Kel-Tec Sub 2000 features a latch that locks the weapon in a folded position. The stock features three holes for adjusting the length of pull, and there’s a lockable pin at the rear of the stock for locking the stock in place. – Multiple mags. The Sub 2000 accepts Glock magazines in a 40-caliber model. There’s also a magazine holder that accepts several other brands of magazines.

– Lack of accessory mounting options. The Kel-Tec Sub 2000 does not support accessory mounting but features a Picatinny upper handguard and an M-LOK rail. Since the upper handguard is not folding, optics cannot be mounted. This design also prevents the gun from folding when mounted. However, it does have some advantages. In addition to its excellent durability, the KelTec Sub 2000 folds in half, so you can carry more than one gun at a time.

Leave a Reply

Your email address will not be published.